|
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
| |
Alloying in the small workshop
ANTHONY P. ECCLES
APECS Investment Castings Pty. Ltd, Melbourne Australia
This paper was presented at the 1996
10th annual Santa Fe Symposium
As a jewellery craftsman of 50 years standing, 30 years of which have been devoted to
custom casting for the jewellery industry, I have pleasure in describing some of the
pitfalls and successes I have experienced in the making of gold alloys in general with
particular reference to a silicon containing master alloy for the lower carat rated yellow
golds which I invented in 1964, and gave to The Worshipful Company of Goldsmiths in 1969
(Figure 1). Whether alloying gold for ingots, granulation or casting, I have found there
are some basic parameters to be observed.
|
Contact Information
- Telephone
- +613 9808 5233 Direct Orders +613 9808 2968
- FAX
- 613 9808 3047
- Postal address
- P.O. Box 307, Burwood 3125
17 Harker Street, Burwood, Victoria, Australia
- Electronic mail
- General Information: mail@apecs.com.au
|
|
|
Top of Page |
Return
to "Technical Information"
